Leading Provider of Oil Spill Management
and Prevention Products
|
C.I.Agent can be used to treat spills or as a preventative measure where a spill is likely to occur in many applications.
C.I.Agent is a powder that can be put on spills such as oil, diesel fuel, hydraulic fluid, transmission oil, and any other petroleum based fluid, and it will solidify it into a rubber-like mass. Then the solidified product can be used as a fuel or sold to companies that produce as a filler to add strength and flexibility to their products. If you choose to, in most cases, the waste can just be thrown away. That's right.
Once C.I.Agent solidifies a fluid, you may dispose of it in the trash (check with your local EPA for restrictions). |
|
C.I.Agent® Barrier Boom for Multiple Applications |
|
C.I.Agent® Barrier Boom is a device designed to prevent the flow of hydrocarbons from a containment site while allowing the unimpeded flow of water. The barrier boom is constructed from non-woven geo-textile material filled with C.I.Agent® Granules, a proprietary blend of USDA food-grade polymers, and backed with Agent-X, a non-woven geo-textile material with C.I.Agent® embedded within the fabric. C.I.Agent® Barrier Boom has become the accepted solution for SPCC secondary containment by professional engineers across the nation.
download spec sheet
Installation guide |
C.I.Agent® Quick Deployment Boom |
|
C.I.Agent® Quick Deployment Boom (QDB) is a spill containment device for hydrocarbon spills on both land and water. The 1.75 in. QDB is filled with C.I.Agent®, a proprietary blend of USDA food grade polymers, which encapsulate and solidify hydrocarbons upon contact.
download spec sheet |
C.I.Agent® Marine Boom |
|
C.I.Agent® Marine Boom is a spill containment device for hydrocarbon spills in waters that may have currents, as well as calm waters such as harbors, streams, rivers, and tidal areas. The C.I.Agent® Marine Boom is approximately 3” in diameter and is filled with a proprietary blend of polymers that contain larger granules to increase the solidification rate throughout the boom. The larger C.I.Agent® Granules also increase the efficiency of the boom with heavier oils while maintaining the ability to polish sheen.
download spec sheet |
C.I.Agent® Sheen Boom |
|
C.I.Agent® Sheen Boom is a device especially designed to collect sheen and hydrocarbons from the surface of water where there are issues with currents and/or wind. The Sheen Boom is constructed from a special high tensile screen that allows hydrocarbons to enter into the boom and be solidified by a proprietary blend of large and small polymers. The C.I.Agent® Sheen Boom will not allow the hydrocarbons to leach out of the back side of the boom like polypropylene booms.
The C.I.Agent® Sheen Boom is reusable until it becomes solid; simply rinse dirt and debris from the surface and redeploy as needed.
download spec sheet |
C.I.Agent ® Agent-X |
|
C.I.Agent® Agent-X is a new generation of smart textiles using embedded technology. Agent-X is made of two layers of a geo-textile with C.I.Agent® Polymers embedded between the layers. This hybrid creates a filtration fabric that encapsulates hydrocarbons and forces them to unsaturated areas of the fabric. Agent-X is hydrophobic, which allows water to pass through it, and is oleophilic to solidify hydrocarbons upon contact. Laboratory tests have shown great efficiency in removing small suspended oil droplets found in mechanical emulsions making it a stellar performer for oil sheen removal and for final polishing of effluent waters. Agent-X can be used for both land and water hydrocarbon filtration.
download spec sheet |
C.I.Agent® Bilge Bag, Sock or Oil-Water Separator Skimmer |
|
The C.I.Agent® Bilge Bag is a device that is placed into the bilge of a vessel to capture and solidify hydrocarbons located in the bilge water. As the C.I.Agent® Bilge Bag floats and moves around the bilge compartment, the oil and fuel are captured and separated from the water. This process can be repeated until the bilge water is oil free.
C.I.Agent® Bilge Bags can be placed into the trash for easy disposal unlike polypropylene sheets, pillows, and booms that must be disposed of as special waste.* The C.I.Agent® Bilge Bag can keep bilges free of hydrocarbons and prevent citations and fines levied by the USCG during onboard inspections.
download spec sheet |
C.I.Agent® EVAC Filtration System |
|
The C.I.Agent® EVAC Filtration System uses state-of-the-art filtration technology to remove suspended solids and light sheen from water discharge operations in vaults, manholes, elevator shafts, bilges, tanks and more. Its unique four layer system adsorbs hydrocarbons, removes large and fine sediment, and polishes the water. The EVAC Filtration System comes with a two inch male Camlock quick connect fitting, is packaged in a UN certified liquid-tight container, and is 100% recyclable.
download spec sheet |
C.I.Agent® Loose Granules/Dissolvable Film Pack |
|
C.I.Agent® is a proprietary blend of USDA food grade polymers that is non-toxic, non-corrosive, non-carcinogenic, and non-hazardous. C.I.Agent® is listed on the EPA National Contingency Plan Product Schedule as a “Solidifier” for use on oil spills in the navigable waters of the United States. C.I.Agent® polymers have a long chain molecular structure that is highly cross-linking with organic liquid hydrocarbons, enabling C.I.Agent® to solidify liquid hydrocarbons (sheen, gasoline, diesel, and oils, including crudes) upon contact into an inert solid rubber-like mass that floats.
download spec sheet |
C.I.Agent ® Marina Spill Response Systems |
|
C.I.Agent® Marina Spill Response Systems are designed to contain and recover hydrocarbon spills on water in marinas. Each C.I.Agent® Marina Spill Response System contains a Quick Deployment Boom, Bilge Bags, and C.I.Agent® Dissolvable Film Packs.
download spec sheet |
Oil Test Paper |
|
The Oil Test Paper can quickly and accurately determine the presence of hydrocarbons in water. When the Oil Test Paper is introduced into a potential hydrocarbon situation, the light blue strip will turn a darker blue if hydrocarbons are present. The color intensity and size of the darker blue areas are indicators of the quantity of hydrocarbons contained in the sample. If the sample contains no hydrocarbons, the strip will not moisten or discolor.
download spec sheet |
Kleen-N-Dry - Premium Oil Absorbent and Bioremediation |
|
Kleen-N-Dry is an oil absorbent and remediation product that uses nature’s methods and materials to control and remediate hydrocarbons . Kleen-N-Dry contains all the natural ingredients necessary to accelerate the indigenous microbes to a point where they will rapidly degradate unwanted hydrocarbons. Kleen-N-Dry picks up hydrocarbons from soil or solid surfaces and is harmless to plant and animal life. It is extremely efficient on land spills where a residual dressing on the ground will encapsulate a spill and not allow the spill to leach back into the soil. Kleen-N-Dry is non-abrasive, non-carcinogenic, non-toxic, and is not harmful to the environment.
download spec sheet |
C.I.Agent® Sheen Bag/De-watering Bag |
|
The C.I.Agent® Sheen Bag/De-watering Bag is a device used to process water containing sheen from hydrocarbon contamination. The C.I.Agent® Sheen Bag/De-watering Bag is constructed with Agent-X, a non-woven geo-textile fabric embedded with C.I.Agent® Granules. Each bag also contains a C.I.Agent® Marine Boom to encapsulate and capture hydrocarbons as they move through the device.
download spec sheet |
C.I.Agent® Hydrocarbon Flow Filter (HFF) |
|
C.I.Agent® Hydrocarbon Flow Filter (HFF) is a device that removes hydrocarbons from water to a non-detectable level. The HFF is constructed from a non-woven geo-textile fabric in combination with C.I.Agent®, a proprietary blend of USDA food grade polymers. The C.I.Agent® Granules are capable of encapsulating and capturing all organic hydrocarbons (sheen, gasoline, diesel, and refined oils). The C.I.Agent® HFF allows water to flow through as it removes and captures hydrocarbons including most volatile organic compounds. Each C.I.Agent® HFF is designed for the site specific application.
download spec sheet |
C.I.Agent® Side-Walled Polyvinyl Blankets |
|
The C.I.Agent® Side-Walled Polyvinyl Blanket for hydrocarbon filtration in sandy subsoil, allows storm water to flow through the blanket while removing hydrocarbon from the storm water. In the event of a large spill, the side walls completely solidify, keeping the emulsified hydrocarbon from leaching out. The custom-made blankets can be pre-fabricated at the manufacturing plant or fabricated in the field.
download spec sheet |
C.I.Agent® Spill Response Bags |
|
The C.I.Agent® Spill Response Bag is designed as a “Rapid Spill Response System” for hydrocarbon spills on both land and water. The Spill Response Bag contains several different C.I.Agent® polymer devices — a C.I.Agent® Quick Deployment Boom, C.I.Agent® Granules, and C.I.Agent® Bilge Bags — all for immediate deployment on spills. The Spill Response Bag can be custom designed to meet the specific needs of any application.
download spec sheet |
C.I.Agent® Rapid Response System |
|
C.I.Agent® Rapid Response Systems are easy-to-use and easy-to-store packages containing a variety of spill response materials and equipment specifically designed to meet your hazmat needs. *C.I.Agent® is listed on EPA’s National Contingency Plan Product Schedule.
download spec sheet |
